Chapter 3
 |
Bulb Removal
At this point the bulb should be easily lifted
from the potted can. If you can not get a hold on the bulb,
just turn the potted can over and the bulb should fall into
you hand. |
 |
Gently grab the porcelain socket and pull it off
of the bulb. |
 |
The plug on the bulb is similar to a standard house type
of plug. |
 |
The bulb is a 300 Watt 120 Volt Par 56.
They are available in "Narrow Spot", "Medium Flood" and
"Flood". The most popular of the beam angles is the narrow
spot.
If you are servicing the potted can or
socket, go to Chapter 4, if you
are replacing the bulb continue on this page.
|
 |
Bulb Installation
To install the new bulb, simply hold the new bulb over
the potted can assembly |
 |
Then re-attach the porcelain socket back onto
the side prongs of the bulb.
|
 |
Set the new bulb back into the potted can so the bulb
comes to rest on the slight indentation in the potted can.
| |
Home Page - Order OASE Parts - Order RainJet Parts
| 
